|
Here's
a typical GM distributor with the original breaker points and condenser
still installed. You'll simply replace the breaker points with the
Breakerless SE module.
Note:
Shaft and advance weights are not shown, so as to better illustrate the
breaker points. |
Same
GM distributor shown above after removing the original points and
condenser and installing the Breakerless SE module. Take note of
how the module simply takes the place of the original points, and
uses the same mounting holes and wiring that the points
used.
Note:
Shaft, advance weights and vane are not shown, so as to better illustrate
the Breakerless SE Module. |
Go
to Picture Gallery
|